Friday, 18 August 2017
Youtube Channel Launched
Howdy folks, we are pleased to announce our youtube channel. The link is to the right --->
Tuesday, 25 July 2017
Interview with Alexis Kotlowy
Q: I’m sitting
down with Alexis Kotlowy. Alexis is a jack
of all trades in regards to the work he does with computing and electronics.
Alexis,
could you tell us how it all started?
A: To be concise as possible, I
started in year three at school. I found
a book about electronics, an Osborne book about electronics – an old U.K.
publication – and it just sort of stuck; I got hooked on it and it snowballed
from there.
Q: What happened
next, after you did that?
A: I started pulling stuff apart
and tinkering with things. It got a bit
dangerous at point because I started fiddling around with mains equipment and
my parents had to have safety switch installed, which is still installed
now. Yeah, just pulling stuff apart and
figuring out how it worked. Apparently,
I always used to pull stuff apart but it wasn’t really until I discovered
electronics that I started pulling apart electronics things.
Q: I’m assuming
you’re referring to a Clipsal Safety Switch?
A: Yes. Yeah, RCD switch.
Q: What would you say your favourite
thing is that you really love engaging in?
A: Just design of obscure and
unknown pieces of technology. If it’s
obscure or if it’s, I don’t know – odd, I suppose would be a good word for it;
unexplored would be the word for it – areas of electronics like using analogue
electronics to do things that you don’t expect to do on digital electronics,
which is one thing I’m working on at the moment. That’s the sort of thing I like to fiddle
about with.
Q: Sure. Now, I understand that you have designed some
bits and pieces. Are you happy to go
into how that happens?
A: Yeah, sure. Usually the ideas either comes to me when I’m
trying to go to sleep, which is very inconvenient because I’m trying to go to
sleep or alternatively, if someone comes to me with an idea, saying “Look, I’m trying
to do this. It’s not working very well” and I usually know how to solve it that
requires redesigning an entire circuit.
Let me think – when the ideas
I came up with was to convert the output of the chip, which runs the MSX series
of computers and output it so it has a high resolution RGB or component
output. A friend of mine came to me and
said “Look, can it be done?” and I said “Yes, certainly” and I went ahead and
designed it, made some PCBs up. Sold him
one PCB and still had a few PCBs leftover to sell.
Another thing is, I noticed
deficiencies in existing products, like an Atari 2600 composite mods. I don’t think the resolution of the output is
as good as it can be, so I redesigned my own composite and s-video mod, which
is all in one unit and importantly, you don’t have to drill out the case to install
the mod. That’s another deficiency I
found in the existing mods; you have to drill out the case to put holes in the
case to install new sockets. My mod, you
don’t have to do that.
Q: Did you
envisage that you’d be doing all this work that you do?
A: Not really. It just, sort of
comes naturally. I often say I can’t see
more than two weeks ahead into the future, but it’s just something that’s
always been inherent in what I do. I
always like to tinker and I always like to explore new ideas.
It’s interesting that the
course I’m doing – we did the personality test and my personality type is just
that I’m very creative – but it’s interesting because the professions that are
listed underneath, which would be not suitable for my personality type included
electronics, electrical work, stuff that involves heavy mathematics and
stuff. Even though I’m not that great at
mathematics, I still manage to get around with electronics quite proficiently.
It’s interesting because I’m
a creative mind, I can often see around interesting roadblocks that most other
people will probably get stumbled; most other people stumble on. It gives me an interesting advantage but at
the same time, I’m not so good with mathematics, so I can’t figure out stuff
that’s very complicated in the sense that I can’t simplify a circuit diagram
with mathematics. I have to do it
visually, for example.
Q: Thank you, Alexis for your time.
A: No problems.
Friday, 14 July 2017
July 2017 Event
Free For All Retro Computing Event!
Time: 7:30pm
Date: Friday 14th July 2017
Location: Eastwood Community Centre Hall - 95 Glen Osmond Road, Eastwood SA 5063
Cost of entry is $4 per person. (Children under 12 exempt)
July's event is on the 14th July!
Any retro computer or gaming system is fine: Apple, IBM, Commodore, Amiga, Atari, Sega, Nintendo, Wonderswan, FM Towns, BeBox, NEXT, we want to see them all. We'd especially like to see stuff we haven't seen before, so no matter how obscure it is, we want to see it.
If you don't have anything to bring in that's fine, we'd like to see as many people attend to spectate as those with displays.
We request that systems be dated 2001 or earlier.
A popular feature of recent events has been a two player retro gaming competition. We'll be doing this again. We'll have the projector setup with a retro gaming system.
Second hand sale tables for those wanting to sell Retro systems and retro system accessories should be available as usual.
The event starts at 7:30pm, but for those bringing in systems please arrive at 7:00pm to set up. Please bring power boards and extension cables for your equipment. Tables are provided.
There is a $4 entry fee to cover costs of room hire, etc.
For directions to the Eastwood Community Centre please visit our website at http://adelaideretrocomputing.blogspot.com.au/ and click on Meeting Location for directions.
We look forward to seeing you all there!
Tuesday, 30 May 2017
June 2017 Event
Free For All Retro Computing Event!
Time: 7:30pm
Date: Friday 9 June 2017
Location: Eastwood Community Centre Hall - 95 Glen Osmond Road, Eastwood SA 5063
Cost of entry is $4 per person. (Children under 12 exempt)
June's event will not have a specific theme and will be a Free for all Retro Computer event!
Any retro computer or gaming system is fine: Apple, IBM, Commodore, Amiga, Atari, Sega, Nintendo, Wonderswan, FM Towns, BeBox, NEXT, we want to see them all. We'd especially like to see stuff we haven't seen before, so no matter how obscure it is, we want to see it.
If you don't have anything to bring in that's fine, we'd like to see as many people attend to spectate as those with displays.
We request that systems be dated 2001 or earlier.
A popular feature of recent events has been a two player retro gaming competition. We'll be doing this again. We'll have the projector setup with a retro gaming system.
Second hand sale tables for those wanting to sell Retro systems and retro system accessories should be available as usual.
The event starts at 7:30pm, but for those bringing in systems please arrive at 7:00pm to set up. Please bring power boards and extension cables for your equipment. Tables are provided.
There is a $4 entry fee to cover costs of room hire, etc.
For directions to the Eastwood Community Centre please visit our website at http://adelaideretrocomputing.blogspot.com.au/ and click on Meeting Location for directions.
We look forward to seeing you all there!
Saturday, 6 May 2017
May 2017 Event
Free For All Retro Computing Event!
Time: 7:30pm
Date: Friday 19 May 2017
Location: Eastwood Community Centre Hall - 95 Glen Osmond Road, Eastwood SA 5063
Cost of entry is $4 per person. (Children under 12 exempt)
May's event will not have a specific theme and will be a Free for all Retro Computer event!
Any retro computer or gaming system is fine: Apple, IBM, Commodore, Amiga, Atari, Sega, Nintendo, Wonderswan, FM Towns, BeBox, NEXT, we want to see them all. We'd especially like to see stuff we haven't seen before, so no matter how obscure it is, we want to see it.
If you don't have anything to bring in that's fine, we'd like to see as many people attend to spectate as those with displays.
We request that systems be dated 2001 or earlier.
A popular feature of recent events has been a two player retro gaming competition. We'll be doing this again. We'll have the projector setup with a retro gaming system.
Second hand sale tables for those wanting to sell Retro systems and retro system accessories should be available as usual.
The event starts at 7:30pm, but for those bringing in systems please arrive at 7:00pm to set up. Please bring power boards and extension cables for your equipment. Tables are provided.
There is a $4 entry fee to cover costs of room hire, etc.
For directions to the Eastwood Community Centre please visit our website at http://adelaideretrocomputing.blogspot.com.au/ and click on Meeting Location for directions.
We look forward to seeing you all there!
Sunday, 16 April 2017
April 2017 Event
Commodore Retro Computing Event!
Time: 7:30pm
Date: Friday 21 April 2017
Location: Eastwood Community Centre Hall - 95 Glen Osmond Road, Eastwood SA 5063
Cost of entry is $4 per person. (Children under 12 exempt)
April's event is a Commodore Retro Computing event!
We have delayed the monthly meeting by one week this month to occur the friday night after Easter.
Any Commodore retro system is fine: Commodore Pet, Max, 4+, C16, Vic 20, C64, 64GS, SX64, C65 (being hopeful here!), C128(D), Amiga 500/600/1000/1200/2000/3000/4000 - we want to see them all. We'd especially like to see stuff we haven't seen before, so no matter how obscure it is, we want to see it.
If you don't have anything to bring in that's fine, we'd like to see as many people attend to spectate as those with displays.
We will also have a presentation by Tony Clarke on Commodore 64 Graphics, and Paul Monopoli featuring the latest game developments for the Amstrad system.
We request that systems be dated 2001 or earlier.
A popular feature of recent events has been a two player retro gaming competition. We'll be doing this again. We plan to have the projector setup with a retro gaming system.
Second hand sale tables for those wanting to sell Retro systems and retro system accessories will be available.
The event starts at 7:30pm, but for those bringing in systems please arrive at 7:00pm to set up. Please bring power boards and extension cables for your equipment. Tables are provided.
There is a $4 entry fee to cover costs of room hire, etc.
We look forward to seeing you all there!
Monday, 12 December 2016
December BBQ + Event
Last Friday we held our last meeting for the year! Photos are available on our Facebook page + Epsilon has written a nice comprehensive blog post covering the event which also includes additional pics. Please see here: Epsilon's Blog Post
Subscribe to:
Posts (Atom)